How to Add Ultimate Performance Windows 11: A Step-by-Step Guide

Adding Ultimate Performance Mode in Windows 11 can give your computer a significant boost in speed and responsiveness. This performance mode is perfect for high-demand tasks like gaming or video editing. Here’s a quick overview: You’ll enable Ultimate Performance mode through Power Options in the Control Panel. It’s straightforward, and within a few minutes, your PC will be speeding along like a race car.

How to Add Ultimate Performance Mode in Windows 11

In this section, we’ll go through the steps to add Ultimate Performance mode to your Windows 11 computer. Follow these directions carefully, and you’ll be maximizing your PC’s performance in no time.

Step 1: Open the Control Panel

First, click on the Start menu and type "Control Panel." Hit Enter to open it.

The Control Panel is a hub for all your system settings. It’s like the cockpit of your high-performance vehicle, where you can fine-tune everything.

Step 2: Go to Power Options

Once the Control Panel is open, locate and click on "Power Options."

Power Options is where you manage your PC’s power plans. These plans are like the gears in your car; changing them affects how your computer uses energy and performs.

Step 3: Open a Command Prompt as Administrator

Now, you’ll need to open a Command Prompt with administrative privileges. To do this, type "cmd" in the Start menu, right-click on Command Prompt, and select "Run as administrator."

Running Command Prompt as an administrator gives you the keys to the kingdom, allowing you to make changes that affect the entire system.

Step 4: Enter the Command

Type this command into the Command Prompt and hit Enter: powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61.

This command tells your computer to add the Ultimate Performance plan to your list of power plans. Think of it like adding a turbocharger to your car’s engine.

Step 5: Select Ultimate Performance in Power Options

Go back to the Power Options window, and you should now see "Ultimate Performance" as one of the choices. Click on it to activate.

Selecting this plan is like flipping the switch that unleashes your computer’s full potential. You’ll notice the difference in how quickly applications respond and how smoothly everything runs.

After completing these steps, your computer will switch to Ultimate Performance mode. You’ll likely notice faster load times and smoother multitasking. This mode uses more power, so it’s best for desktops or laptops plugged into power sources.

Tips for Adding Ultimate Performance Mode in Windows 11

  • Check for Compatibility: Ensure your system is compatible with Ultimate Performance mode. Some older hardware might not benefit as much.
  • Monitor Temperature: Keep an eye on your system’s temperature, especially if you’re using a laptop. High performance can lead to increased heat.
  • Close Unnecessary Programs: To get the most out of Ultimate Performance mode, close programs you’re not using.
  • Update Drivers: Make sure all drivers are up-to-date to avoid any bottlenecks in performance.
  • Backup System: Always backup your system before making significant changes, just in case something goes wrong.

Frequently Asked Questions

What is Ultimate Performance mode?

Ultimate Performance mode is a power plan that prioritizes performance over energy efficiency, designed for high-demand tasks.

Does Ultimate Performance mode work on all PCs?

It works best on newer, high-performance PCs. Some older models may not see significant benefits.

Will Ultimate Performance mode drain my battery quickly?

Yes, it will use more power, so it’s best to use it when your laptop is plugged in.

How can I switch back to a different power plan?

You can switch back by going to Power Options in the Control Panel and selecting a different plan.

Is it safe to use Ultimate Performance mode?

Yes, it’s safe, but keep an eye on system temperatures and make sure your hardware is up to the task.


  1. Open the Control Panel.
  2. Go to Power Options.
  3. Open a Command Prompt as Administrator.
  4. Enter the command: powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61.
  5. Select Ultimate Performance in Power Options.


Adding Ultimate Performance mode to Windows 11 is like giving your computer a nitro boost. It’s simple and can make a noticeable difference, especially if you’re running demanding applications. Just follow the steps, and your PC will be running at its best in no time.

Remember, this mode is a power-hungry beast. Keep an eye on your system’s temperature and make sure your hardware can handle the extra load. If you follow the tips and steps outlined, you’ll be well on your way to getting the most out of your Windows 11 machine.

For further reading, consider diving into more advanced power management settings or exploring other performance tweaks for Windows 11. Happy computing!

Get Our Free Newsletter

How-to guides and tech deals

You may opt out at any time.
Read our Privacy Policy