Last updated on November 17th, 2026 at 03:16 pm
To connect Beats to a Windows 11 PC, put the Beats in pairing mode, then select Start > Settings > Bluetooth & devices > Add device > Bluetooth and choose your Beats from the list. Windows treats them as ordinary Bluetooth headphones, so you don’t need an app or a driver download.
Applies to: Windows 11 with current Beats headphones, earbuds and speakers.
Charge the Beats and check Bluetooth
- Charge the Beats and turn them on. Make sure both the Beats and the PC are charged and powered on.
- Keep them next to the PC. Keep Beats within 30 feet of the paired device and away from microwaves, wireless routers and other Bluetooth devices. For the first pairing, closer is better.
- Check that the PC has Bluetooth. If there’s no Bluetooth switch in Settings, turn on Bluetooth in Windows 11 first. A desktop PC without Bluetooth hardware needs a USB Bluetooth adapter.
- Know your model’s pairing button. Each Beats model uses a different button. The table in the next section lists them.
Put your Beats in pairing mode
Pairing mode (Apple calls it discovery mode) makes the Beats visible to a new device. Here’s the button for each model:
| Beats model | How to make them discoverable |
|---|---|
| Beats Studio Pro | Press and hold the system button on the right earcup. |
| Beats Solo 4 | Press and hold the power button on the right earcup. |
| Beats Solo3 Wireless | Press the power button for 5 seconds. When the Fuel Gauge lights flash, the headphones are discoverable. |
| Beats Fit Pro, Beats Studio Buds +, Powerbeats Fit, Powerbeats Pro 2 | Place the earbuds in the case. With the case open, press and hold the system button. |
| Beats Solo Buds | Place the earbuds in the case. With the case open, press and hold the button above the “b” logo on either earbud until a tone repeats. |
| Beats Flex | Press and hold the power button on the right control module. |
| Beats Pill (speaker) | Press and hold the power button until a tone repeats. |
If your model isn’t listed, look it up in the Pair Beats guide. For a Windows PC, all you do is make the Beats discoverable and then follow the PC’s own Bluetooth pairing steps, which are below.
Connect Beats to Windows 11 in Settings
- Select Start, then Settings > Bluetooth & devices. The Bluetooth page opens.
- Make sure the Bluetooth switch is On.
- Put the Beats in pairing mode, using the table above. Keep them beside the PC.
- Select Add device.
- Select Bluetooth. Windows searches for nearby devices.
- Select your Beats when the name appears in the list, and follow any instructions on the screen.
- Select Done when Windows finishes pairing.

You only pair once. When Bluetooth is turned on, a paired device and the PC connect automatically whenever they’re in range of each other.
Connect from quick settings instead
This route skips the Settings app.
- Put the Beats in pairing mode.
- On the taskbar, select the Network, Sound or Battery icon next to the time and date. Quick settings opens.
- If the Bluetooth tile isn’t highlighted, select it to turn Bluetooth on.
- Select the Manage Bluetooth devices arrow on the Bluetooth tile.
- Select your Beats under New devices.
- Follow any instructions that appear, then select Done.
Both methods produce the same pairing, so use whichever you find easier. The same steps work when you connect other Bluetooth headphones to a Windows 11 laptop.
Make sure sound plays through the Beats
Pairing and choosing where sound plays are separate settings in Windows. If audio still comes from the PC speakers after pairing:
- Select the Speakers icon on the taskbar.
- Select the arrow that opens the list of audio devices. Its tooltip reads Select a sound output.
- Choose your Beats from the list of audio devices.
You can make the same choice in Start > Settings > System > Sound, in the Output section. For calls and meetings, open the sound settings and select the Beats as the recording device as well as the playback device. Many calling apps also have their own microphone and speaker settings, so check there if the app ignores the Windows choice.
Music can sound different while an app is using the Beats microphone. Bluetooth headsets use a different audio mode for two-way calls than for playback, so this is expected and doesn’t mean the Beats are faulty.
Disconnect or remove your Beats
Turning the Beats off, or putting earbuds back in their case, ends the connection and keeps the pairing for next time.
To delete the pairing from the PC, go to Settings > Bluetooth & devices > Devices, select More options (the three dots) next to your Beats, then select Remove device > Yes. You’ll need to pair again before you can use them with this PC.
If your Beats don’t show up or won’t connect
Start at the top; the quickest fixes come first.
- Confirm pairing mode. Repeat the button press for your model. Beats that are only switched on, and not discoverable, won’t appear in the list.
- Check the battery and distance. Charge the Beats and bring them right next to the PC.
- Check airplane mode. Open quick settings and make sure airplane mode is off.
- Turn Bluetooth off and on. In Settings > Bluetooth & devices, turn Bluetooth off, wait a few seconds, then turn it back on.
- Remove and pair again. If the Beats are listed but won’t connect, use More options > Remove device as described above, then pair from scratch.
- Run the Bluetooth troubleshooter. The Get Help app has an automated Bluetooth troubleshooter that runs diagnostics and tries to fix the problem.
- Restart and update. Restart the PC, then go to Settings > Windows Update and select Check for updates.
- Update the Bluetooth driver. An outdated or incompatible driver is one of the most common causes of Bluetooth connection problems. In Device Manager, right-click the Bluetooth adapter and select Update driver > Search automatically for updated driver software. If that finds nothing, try the other ways of updating the Bluetooth driver on Windows 11.
- Reset the Beats. If nothing else works, reset them and pair again. The button combination is different for each model. For example, to reset Beats Solo 4, hold the volume down button and the power button for 10 seconds until the light flashes red and white. Find your model in the Reset Beats guide.
On a work or school PC, your organization can restrict Bluetooth. If the Bluetooth controls are missing or you can’t change them, ask your IT administrator.
Connected, but no sound
- Choose the Beats as the output device, as shown above, and turn up the volume on both the PC and the Beats.
- Go to Settings > Bluetooth & devices > Devices, select your Beats, then select Advanced sound properties. Under Output settings, set Format to the 2 channels, 16 bit, 48000 Hz (DVD Quality) option. This often fixes Bluetooth audio that is connected but silent.
- Go to Start > Settings > System > Troubleshoot > Other troubleshooters and select Run next to Audio.
Do I need an app or driver to use Beats on Windows 11?
No. Beats pair through the Bluetooth settings built into Windows 11. The only driver involved is the one for the PC’s own Bluetooth adapter, and if that adapter misbehaves you can reinstall the Bluetooth driver.
How do I reset Beats that won’t pair?
Each model has its own reset buttons and timing, listed in the Reset Beats guide linked above. After a reset, remove the old Beats entry from Windows and pair again.
Once your Beats are paired, test them with a song or video. Have Apple earbuds too? You can connect AirPods to a Windows 11 PC the same way.
Use a cable instead of Bluetooth
Some over-ear and on-ear Beats also work with a cable, which helps on a PC without Bluetooth or when the battery is flat.
- Beats Studio Pro and Beats Solo 4: connect the included 3.5 mm audio cable to the headphones and to the PC’s headphone jack. The headphones need no battery power in this mode.
- Beats Solo3 Wireless: plug in the RemoteTalk cable to use the headphones in wired mode.
- USB-C audio: USB-C listening on Studio Pro and Solo 4 is supported for iPhone, iPad, Mac and Android devices. Windows PCs aren’t on that list, so treat the 3.5 mm cable as the dependable wired option.
After plugging in, choose the headphones in the taskbar sound output list if Windows doesn’t switch automatically.
Related guides

Matt Jacobs writes and maintains the guides on Support Your Tech, which he started in 2017. He spent most of his career keeping small-business PCs running and still takes the occasional consulting job, so the steps here come from fixing the same problems on other people’s computers. Every guide is checked on his own Windows 11, Windows 10, Mac, iPhone and iPad before it goes up.